Keyless Bushing (Fastening Fittings)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Recommendation
Tapered Clamping Bush 1008 with Inch Drill
CONCAR
[Specifications]
・Type: 1008
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 9.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Recommendation
Tapered Clamping Bush 1008 with Metric Drill
CONCAR
[Specifications]
・Type: 1008
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 4.72 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Standard
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Compact
MISUMI
[Features] It has a centring function and is suitable for a smaller hub.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Compact and self-centering locking device KBS61
KBK
· Large clamping range
· High centering capability and good concentricity properties
· Compact design
· Available starting from 5mm shaft diameter
· Torque range: 6 - 1900Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.35 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 9.33 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing
Self-centering locking device KBS13
KBK
· For connections in the smallest places
· Very short design
· Self-centering
· Torque range: 310 - 46980Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies TOK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 12.35 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies 8006 SST
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free.- 3D CAD data available
Configure nowMin. Shipping Days ： 3 Days -
Locking Assemblies COM-A
MAEDLER
Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For medium high torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 15.55 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SIG
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower torques.
• Minimal space requirement.
• Self-centering.
• Axial movement during mounting.
• The connection can be disassembled with a puller.
Required tolerances: Shaft: h8.
Bore of the part to be clamped: H8.
Surface roughness Rz max. 12.5 μm.- Volume Discount
Configure nowStarting from∗ ： 28.82 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Thin
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 28.46 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Straight
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.14 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Self-centering locking Device with flange KBS16
KBK
· For connections in the smallest places
· Very short design
· No axial displacement during assembly
· Self-centering
· Torque range: 260 - 36100Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Self-centering locking device for small hubs KBS80
KBK
· For high concentricity and perpendicularity of the components
· No axial displacement during assembly
· Self-centering
· Torque range: 12 – 17500Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 12.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Rigid Shaft Coupling
KBK
· Very cost-effective
· For medium and low torques
· No axial displacement during assembly
· Self-centering
· Torque range: 158 - 4300Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.99 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing
POSI LOCK D
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.
[Features]
· Tighten the clamping bolt to move the outer ring in the shaft direction.
· At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.
· The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.
· Short in shaft direction, does not take up more space than necessary.
· PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 73.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Elements 8006
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Shrink Disc
KBK
· For hollow shaft connections
· Applicable for high bending moments
· Short overall length
· Good concentricity properties
· Self-centering and self-releasing
· Torque range: 40 - 327000Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.41 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing
Mecha-Lock MN Series, Nut Type
ISEL
Easy-to-tighten nut type key-less bushing (fastening fitting).
[Features]
· Tightening the nut shortens the tightening time.
· Easiest assembly among mechanical lock series.
· Centering can be done by simply tightening both the sides.
· Also contributes to reduction of hub outer diameter.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Ideal for installations with thinner hub thickness and low torque.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.53 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Elements Slotted 8006 SST
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Configure nowMin. Shipping Days ： 3 Days -
- Promotional pricing
Keyless Bushings / Easy Mounting (Nut)
MISUMI
[Features] It can be easily installed by simply tightening 1 nut.- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 40.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Mecha Lock MA, Standard Type
ISEL
[Features]
· 34 models that have shaft diameters standardized from ø5 to ø85.
· Centering function suppresses outer circumference and terminal surface run-out.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining.
· Wide range of hub options with thin walls and low surface pressure- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 38.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies COM-B
MAEDLER
Material: Steel.
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 18.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Short locking device for higher tolerances KBS40
KBK
· Costs-effective
· Very short
· Large span
· Non self-centering
· Torque range: 255 - 68000Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 11.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies Stainless Steel 7061 SST
RINGFEDER
Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. High-strength clamping screws allow a higher performance range.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Tapered Clamping Bush 2517 with Metric Drill
CONCAR
[Specifications]
・Type: 2517
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 8.18 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Locking Assemblies 7003
RINGFEDER
Universal clamping set for small installation space. Self-centering and easy to install for medium to high torques.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies 7015.1
RINGFEDER
Locking Assembly for transmission of torques, axial forces and high bending moments at reduced contact pressures, with special requirements to the true running of the clamped pieces. Special features With the long and flat angle of the cones, the required loads can be transferred with one Locking Assembly RfN 7015.1. During mounting Locking Assembly, shaft and hub remain to each other in position. Compared to three-part construction types, thus an additional safety is provided. Shaft and hub are only compression loaded.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Element
KBK
· Very cost-effective
· For medium and low torques
· Requests a mounting flange provided by the customer
· Compact installation dimensions
· Non self-centering
· Torque range: 2,4 - 31500Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.83 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]
· For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.
· This facilitates great torque transmission.
· Boss hole and shaft hole fitting is up to H8/h8- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tapered Clamping Bush 1610 with Metric Drill
CONCAR
[Specifications]
・Type: 1610
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 8.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Keyless Bushing (Fastening Fittings)
OPTIBELT
[Specifications]
・Shaft Bore Dia. d(Ø): 10-120
・Overall Length W(mm): 22.3-127
・Outer Dia. A(φ): 35-178Configure nowMin. Shipping Days ： 4 Days -
Locking Assemblies 7070
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies 7515
RINGFEDER
The self-centering precision Locking Assembly for transmission of torques, axial forces and special optimised for the transmission of bending moments, with special requirements to the true running of the clamped pieces.- 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
Locking Assemblies COM-L, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For very high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.
* When using in a stepped bore, the clearance C is to be foreseen for demounting.- Volume Discount
Configure nowStarting from∗ ： 33.68 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 2012
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Configure nowStarting from∗ ： 10.94 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TOK Version B
MAEDLER
Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 14.38 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TMK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• With a second hexagon to hold against while tightening the nut.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 15.34 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Keyless Bushings / Straight for High Torque
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 105.79 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Mecha-Lock MKA, Rust-Proof Standard Electroless Nickel Plating Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Electroless nickel plated product.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 56.59 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications
ISEL
Nut tightening shortens tightening time. Electroless nickel plated product.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 90.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mechanical Lock MR Thin Type
ISEL
Using thin-type keyless bushing (fastening fitting), the outer diameter can be reduced.
[Features]
· Ideal for when a thin-wall hub design is desired.
· The outer diameter of the hub can be reduced by making the wall thinner.
· Can be used for overall short length hubs.
· Installation time is reduced by reducing the number of bolts.
· With short surface pressure section, the product is ideal for reducing the width of the hub.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Can be used for overall short length hubs.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
POSI LOCK G
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Can support heavy loads.
[Features]
· Tightening the clamping bolt moves the 2 taper rings in the shaft direction.
· At this time, the wedging action between both the inner ring and the outer ring against the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.
· The PSL-G has an even transmission ability due to its simple construction and strong components, and it can also cope with heavy loads.
· Short in shaft direction, does not take up more space than necessary.
· PSL-G-C (simple rust-proofing specification) is a simple rust proofing specification that involves applying electroless nickel plating to the main body.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 54.73 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Mega Lock, MC, Standard Type (Aluminum Specifications)
ISEL
· 22 models from φ4 to φ35 shaft diameter available as standard
· Supports aluminum timing pulleys (steel is also usable)
· Reduced number of bolts shortens attachment/detachment time
· With a spigot joint on the back, it can also be used as a bearing retainer
· With low surface pressure, it is also ideal for hollow shafts- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(Ø) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(Ø) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CONCAR | CONCAR | MISUMI | MISUMI | KBK | KBK | KBK | MAEDLER | RINGFEDER | MAEDLER | MAEDLER | MISUMI | MISUMI | KBK | KBK | KBK | MIKI PULLEY | RINGFEDER | KBK | ISEL | RINGFEDER | MISUMI | ISEL | MAEDLER | KBK | RINGFEDER | CONCAR | RINGFEDER | RINGFEDER | KBK | KATAYAMA CHAIN | CONCAR | OPTIBELT | RINGFEDER | RINGFEDER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MISUMI | ISEL | ISEL | ISEL | MIKI PULLEY | ISEL |
| Product Series | Mecha-Lock MKA, Rust-Proof Standard Electroless Nickel Plating Specifications | Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||
| Starting from∗ | 9.45 € *Unit price with basic configuration | 4.72 € *Unit price with basic configuration | 35.76 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 31.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.35 € Special price *Unit price with basic configuration Promotional pricing | 9.33 € *Unit price with basic configuration | 9.90 € Special price *Unit price with basic configuration Promotional pricing | 12.35 € *Unit price with basic configuration Volume Discount | - | 15.55 € *Unit price with basic configuration Volume Discount | 28.82 € *Unit price with basic configuration Volume Discount | 28.46 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 35.14 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.90 € Special price *Unit price with basic configuration Promotional pricing | 12.08 € Special price *Unit price with basic configuration Promotional pricing | 10.99 € *Unit price with basic configuration | 73.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | - | 14.41 € *Unit price with basic configuration | 46.53 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | - | 40.66 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 38.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 18.43 € *Unit price with basic configuration Volume Discount | 11.77 € Special price *Unit price with basic configuration Promotional pricing | - | 8.18 € *Unit price with basic configuration | - | - | 2.83 € *Unit price with basic configuration | 5.43 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 8.26 € *Unit price with basic configuration | - | - | - | 33.68 € *Unit price with basic configuration Volume Discount | 10.94 € *Unit price with basic configuration Volume Discount | 14.38 € *Unit price with basic configuration Volume Discount | 15.34 € *Unit price with basic configuration Volume Discount | 105.79 € *Unit price with basic configuration Volume Discount | 56.59 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 90.75 € *Unit price with basic configuration | 46.50 € *Unit price with basic configuration | 54.73 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 31.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount |
| Min. Shipping Days | 3 Days | 3 Days | Same day | Same day | Same day | 12 Days | Same day | 4 Days | 3 Days | 4 Days | 4 Days | Same day | Same day | Same day | Same day | 12 Days | Same day | 5 Days | 12 Days | Same day | 3 Days | Same day | Same day | 4 Days | Same day | 5 Days | 3 Days | 5 Days | 5 Days | 12 Days | Same day | 3 Days | 4 Days | 5 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | Same day | Same day | 5 Days | 5 Days | Same day | Same day |
| Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Type | - | - | Flanged | Thin Wall | Straight | - | Straight | - | - | - | - | Direct Mounting | Straight | Flanged | Flanged | - | Straight | - | - | Nut Tightening | - | Nut Tightening | Flanged | - | Straight | - | - | - | - | - | Sleeve | - | - | - | - | - | - | - | - | Straight | Flanged | Nut Tightening | Thin Wall | Straight | Flanged |
| Centering | - | - | Provided | Provided | - | - | - | Provided | - | Not Provided | Provided | Not Provided | Not Provided | - | - | - | - | - | - | Provided | - | Not Provided | Provided | Provided | - | - | - | - | - | - | Not Provided | - | - | - | - | Provided | - | Provided | Provided | Not Provided | Provided | Provided | Provided | - | Provided |
| Body Material | Grey Iron | Grey Iron | Steel / Stainless Steel | Steel / Stainless Steel | Steel | - | Steel | - | - | - | - | Steel | Steel | Steel | Steel | - | Steel | - | - | Steel | - | Steel | Steel | - | Steel | - | Grey Iron | - | - | - | Steel | Grey Iron | - | - | - | - | - | - | - | Steel | Steel | Steel | Steel | Steel | Aluminum |
| Shaft Bore Dia. d(Ø) | - | - | 5 ～ 70 | 5 ～ 50 | 5 ～ 50 | - | 18 ～ 180 | - | - | - | - | 5 ～ 30 | 20 ～ 65 | 18 ～ 180 | 6 ～ 120 | - | 2 ～ 50 | - | - | 8 ～ 35 | - | 8 ～ 35 | 5 ～ 70 | - | 19 ～ 220 | - | - | - | - | - | 10 ～ 80 | - | 10 ～ 120 | - | - | - | - | - | - | 30 ～ 65 | 8 ～ 50 | 8 ～ 35 | 6 ～ 50 | 19 ～ 120 | 4 ～ 35 |
| Allowable Torque Range(N•m) | - | - | 2.0 to 20.0 ～ 3000.1 to 10000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | - | - | - | - | - | - | 2.0 to 20.0 ～ 100.1 to 150.0 | 200.1 to 300.0 ～ 1000.1 to 3000.0 | - | - | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | - | 20.1 to 50.0 ～ 300.1 to 500.0 | - | 20.1 to 50.0 ～ 300.1 to 500.0 | 2.0 to 20.0 ～ 3000.1 to 10000.0 | - | - | - | - | - | - | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | - | - | - | - | - | - | - | 1000.1 to 3000.0 ～ 3000.1 to 10000.0 | 20.1 to 50.0 ～ 1000.1 to 3000.0 | 20.1 to 50.0 ～ 300.1 to 500.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 200.1 to 300.0 ～ 10000.1 to 300000.0 | 2.0 to 20.0 ～ 200.1 to 300.0 |
| Surface Treatment | - | - | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Electroless Nickel Plating | - | - | - | - | - | - | - | Not Provided | Not Provided / Electroless Nickel Plating | - | - | - | Not Provided / Electroless Nickel Plating | - | - | Not Provided | - | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided | - | - | - | - | - | - | - | Not Provided | - | - | - | - | - | - | - | - | Not Provided | Electroless Nickel Plating | Electroless Nickel Plating | Not Provided | Not Provided / Electroless Nickel Plating | Clear Anodize |
| Hub Dia. D1(Ø) | - | - | 16 ～ 97 | 12 ～ 65 | 16 ～ 80 | - | 47 ～ 235 | - | - | - | - | 8 ～ 35 | 47 ～ 95 | 47 ～ 235 | 14 ～ 155 | - | 16 ～ 80 | - | - | 14 ～ 48 | - | 14 ～ 48 | 16 ～ 97 | - | 47 ～ 285 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 55 ～ 95 | 21 ～ 72 | 14 ～ 48 | 12 ～ 65 | 47 ～ 165 | 15 ～ 56 |
| Tightening Structure | - | - | Single Cone Type | Single Cone Type | Double Cone Type | - | Single Cone Type | - | - | - | - | Single Cone Type | Double Cone Type | Single Cone Type | Single Cone Type | - | Single Cone Type | - | - | Tapered Sleeve Type | - | Tapered Sleeve Type | Single Cone Type | - | Double Cone Type | - | - | - | - | - | Tapered Sleeve Type | - | - | - | - | - | - | - | - | Double Cone Type | Single Cone Type | Tapered Sleeve Type | Tapered Sleeve Type | Double Cone Type | Single Cone Type |
| Tightening Method | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | - | - | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | - | - | - | - | - | Mechanical Type (Wedge Type) | - | - | - | - | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) |
| Allowable Torque(N•m) | - | - | 2.8 ～ 3400 | 3 ～ 2120 | - | - | - | - | - | - | - | 4.2 ～ 149 | 300 ～ 2990 | - | - | - | 6 ～ 1760 | - | - | 29.4 ～ 461 | - | 21 ～ 461 | 7 ～ 3400 | - | - | - | - | - | - | - | 6.9 ～ 1860 | - | - | - | - | - | - | - | - | 1110 ～ 6400 | 16.6 ～ 1362 | 29.4 ～ 461 | 11 ～ 2120 | 289 ～ 13500 | 2 ～ 230 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Centering
- Provided
- Not Provided
-
Body Material
-
Shaft Bore Dia. d(Ø)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(Ø)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Keyless Bushing (Fastening Fittings)
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.