Keyless Bushing (Fastening Fittings)（Page 2）

?* Information on days to ship and prices

• 

  Locking Assemblies COM-A

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
  • For medium high torques.
  • Not self-centering.
  • Self-releasing at dismounting.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 2517

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.42 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TOK Version A

  MAEDLER

  Material Version A: Steel, bright.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.78 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Element

  KBK

  · Very cost-effective
  · For medium and low torques
  · Requests a mounting flange provided by the customer
  · Compact installation dimensions
  · Non self-centering
  · Torque range: 2,4 - 31500Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.83 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Mecha-Lock MKT, Rust-Proof General Purpose Type, Electroless Nickel Plating Specifications

  ISEL

  No drag when connecting for easy removal. Electroless nickel plated product.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	106.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Mega Lock, MC, Standard Type (Aluminum Specifications)

  ISEL

  · 22 models from φ4 to φ35 shaft diameter available as standard
  · Supports aluminum timing pulleys (steel is also usable)
  · Reduced number of bolts shortens attachment/detachment time
  · With a spigot joint on the back, it can also be used as a bearing retainer
  · With low surface pressure, it is also ideal for hollow shafts

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.33 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing, Standard Type (with Centering Function)

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.70 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing (Fastening Fittings)

  OPTIBELT

  [Specifications]
  ・Shaft Bore Dia. d(Ø): 10-120
  ・Overall Length W(mm): 22.3-127
  ・Outer Dia. A(φ): 35-178

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

• 

  Locking Assemblies 7005

  RINGFEDER

  Clamping set for high loads and suitable for alternating moments. Ideal for use in belt drums and flywheels.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7061

  RINGFEDER

  Self-centering clamping set with rough surface pressure, the compact design is ideal for toothed disks.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-AS

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
  • For medium high torques. Like COM-A, but with slotted rings.
  • Not self-centering.
  • Self-releasing at dismounting.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-B

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
  • For medium torques.
  • Also suitable for small hub diameters.
  • Self-centering.
  • Self-locking.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-D

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For high torques.
  • Self-centering.
  • Slight axial offset possible during assembly.
  Concentricity: 0.02 to 0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Mecha-Lock MT, General Purpose Type

  ISEL

  No drag when connecting for easy removal

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing, Centering Type SES

  Save & Secure

  Centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing, Straight Type

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	58 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-A Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-C Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
  · Suitable for short hubs.
  · Internal ring mounts to the terminal face, preventing the hub from moving when connected.
  · Choose from stainless steel or electroless nickel plated products to suit the use environment.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.24 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPA Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · High torque transmission power
  Uses high rigidity aluminum alloy to transmit torque, so it can be used not only with aluminum pulleys but also general steel pulleys.
  · Optimal for clean rooms
  Electroless nickel plating bolts are used standard for the aluminum main body materials, making it optimal for clean rooms.

  Select to compare

  Configure now
  Starting from∗ ：	20.88 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing A.P.LOCK SAPC Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · Optimal for aluminum pulleys.
  When running a servo motor with a timing pulley, conventional friction connection units apply high pressure to the surfaces, which prevents the hub diameter from sitting properly and causes problems with slippage. The SAPC series uses servo motor torque specifications as the basis for reducing the bolt count and lowering pressure on surfaces, making it possible to connect to aluminum pulleys without difficulty.
  · Staged machining structure.
  Designed so that the push plate of the bearing could carry out its role, eliminating the need for the use of a separate bearing push plate.
  · Easy assembly and position setting.
  For conventional power locks, a space of 1 mm from there counterpart items is required to facilitate disassembly, but the SAPC series has a structure that is easy to disassemble even if there is no room for the hub to move during disassembly. Also, position setting is easy.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 2012 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 2012
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	10.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7006

  RINGFEDER

  Universal clamping set for small installation space and axial stop ring. Self-centering and easy to install for medium to high torques.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7070

  RINGFEDER

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tapered Shaft Hubs, without lock nut, stainless steel mm / mm

  HALDER

  Select to compare

  Configure now
  Starting from∗ ：	53.55 €
  Min. Shipping Days ：	1 Day

  *Unit price with basic configuration

• 

  Tapered Shaft Hubs, lock nut, stainless steel mm / mm

  HALDER

  Select to compare

  Configure now
  Starting from∗ ：	58.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies BAR, Stainless

  MAEDLER

  Material: Stainless steel 1.4401 (AISI 316).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • Stainless Steel.
  • For low torques.
  • Very good distribution of pressure.
  • Very good self-centering.
  • Self-releasing at dismounting.
  • Also suitable for large hub and shaft tolerances.
  • Slight axial offset possible during assembly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	96.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-C

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium to high torques.
  • Self-centering.
  • No axial offset.
  Concentricity: 0.02 to 0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-C, Stainless

  MAEDLER

  Material: Stainless steel 1.4401 (AISI 316).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • No axial offset.
  Concentricity: 0.02 to 0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	72.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-L

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For very high torques.
  • Self-centering.
  • Slight axial offset possible during assembly.
  Concentricity: 0.02 to 0.04 mm.
  
  * When using in a stepped bore, the clearance C is to be foreseen for demounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-R

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For lower to medium torques.
  • Not self-centering.
  • Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.
  • Up to 4 clamping sets can be used in line.
  • Versatile usage, for customized solutions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1008

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1108

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1210

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TOK Version B

  MAEDLER

  Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TMK Version A

  MAEDLER

  Material Version A: Steel, bright.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • With a second hexagon to hold against while tightening the nut.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies SIG

  MAEDLER

  Material: Stainless steel 1.4301 (AISI 304).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For lower torques.
  • Minimal space requirement.
  • Self-centering.
  • Axial movement during mounting.
  • The connection can be disassembled with a puller.
  Required tolerances: Shaft: h8.
  Bore of the part to be clamped: H8.
  Surface roughness R_z max. 12.5 μm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes MSD-N

  MAEDLER

  Material: Stainless steel 1.4568 (17/7 PH).
  The MSD-N clamping bush is identical with the MSD bush, but is made from stainless steel. It has been used in many industries for years, as, e.g., the food, medical, automotive, chemical, printing and process engineering industries.
  Concentricity 0.03 - 0.06 mm.
  Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7.
  Temperature range: - 30 °C to + 85 °C.
  
  P_W ≈ 90N/mm², P_N ≈ 70N/mm²

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	317.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes MSD

  MAEDLER

  Material: Steel.
  The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted.
  Concentricity: ≈ 0.03 - 0.06 mm.
  Tolerance: Shaft h8 - k6 (for Prod. No. 615 215 00 only h7), Hub H7.
  Temperature range: -30 °C to 85 °C.
  
  P_W ≈ 90N/mm² P_N ≈ 70N/mm132

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	199.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications

  ISEL

  Nut tightening shortens tightening time. Electroless nickel plated product.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	90.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  POSI LOCK D

  MIKI PULLEY

  Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.
  
  [Features]
  · Tighten the clamping bolt to move the outer ring in the shaft direction.
  · At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.
  · The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.
  · Short in shaft direction, does not take up more space than necessary.
  · PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	73.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  KanaLock, Model KL201MA, Standard Type

  KATAYAMA CHAIN

  Assembling it suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt vibration noise caused by timing pulley vibration.
  
  [Features]
  · Assembling KL201MA suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt drive noise caused by timing pulley vibration.
  · Compatible shaft diameters are ø5 to ø85, and compatible shaft tolerances are g5, g6, h5, h6, h7, and h8

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	53.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing, Self-Aligning Type SDS

  Save & Secure

  Self-centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.33 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-AS Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.20 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-CS Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
  · Suitable for short hubs.
  · Internal ring mounts to the terminal face, preventing the hub from moving when connected.
  · Choose from stainless steel or electroless nickel plated products to suit the use environment.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	74.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  SP Bushing

  EVER-ON CORPORATION

  [Features]
  ● Shaft hole machining and QA machining not required.
  ● Conforms to new JIS key specifications.
  
  [Applications]
  ● For connecting shafts to their appropriate pulleys.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	32.67 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...