Keyless Bushing (Fastening Fittings)（Page 4）

?* Information on days to ship and prices

• 

  Locking Assemblies COM-LL

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For very high torques.
  • Self-centering.
  • Self-locking.
  • Axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	32.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-LLH

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. sprocket or similar) on a shaft.
  • For very high torques.
  • Very good distribution of pressure.
  • High resistant against bending forces.
  • Self-centering.
  • Self-locking.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	54.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies COM-R

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For lower to medium torques.
  • Not self-centering.
  • Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.
  • Up to 4 clamping sets can be used in line.
  • Versatile usage, for customized solutions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1210

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1215

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1610

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1615

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 2012

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.31 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 3020

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 3030

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	32.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 3535

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	51.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 4030

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	65.07 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 4040

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	74.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 4545

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	101.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 5050

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	136.07 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Welding Hubs for Taper Bushes

  MAEDLER

  Material: Steel (St52 or comparable), good weldable.
  Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft.
  Taper bush and chain plate wheel have to be ordered separately.
  Recommended bore tolerance: H8.
  Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink Disks ST-R, Stainless

  MAEDLER

  Material: Stainless steel 1.4057 (AISI 431).
  • For medium torques.
  • No axial shaft-hub movement.
  • Quick mounting.
  • Quick demounting.
  • Not self-centering.
  • Concentricity 0.02-0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	49.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink Disks ST-B

  MAEDLER

  Material: Steel.
  • For high torques.
  • No axial shaft-hub movement.
  • Quick mounting.
  • Quick demounting.
  • Not self-centering.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.89 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink Disks ST

  MAEDLER

  Material: High-quality steel.
  • For very high torques.
  • No axial shaft-hub movement.
  • Quick mounting.
  • Quick demounting.
  • Not self-centering.
  • Concentricity 0.02-0.04 mm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Clamping Bushes MSM-N

  MAEDLER

  Material: Version MSM-N: Stainless steel 1.4305 (AISI 303).
  Concentricity: about 0.02 mm.
  Tolerance: Shaft k6-h10, Hub H8.
  
  P_W ≈ 90N/mm², P_N ≈ 70N/mm²

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	48.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Miniature Clamping Bushes MSM

  MAEDLER

  Material: Version MSM: Mild steel.
  Concentricity: about 0.02 mm.
  Tolerance: Shaft k6-h10, Hub H8.
  
  P_W ≈ 90N/mm², P_N ≈ 70N/mm²

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	44.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies TT 17-35 mm

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For high torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	40.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies SSGK

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For low torques.
  • Very short version.
  • Also suitable for small hub diameters.
  • Not self-centering.
  • Not self-locking.
  • Axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.42 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies SSG

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For low to medium torques.
  • Also suitable for small hub diameters.
  • Self-centering.
  • Self-locking.
  • Axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies (Rigid Couplings) ST-K

  MAEDLER

  Material: Steel.
  • For connecting two shafts, as a rigid coupling.
  • For medium torques.
  • Easy mounting.
  • Self-releasing at dismounting.
  • No axial movement during mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes MSA

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium high torques and axial forces.
  • Minimal space requirement.
  • Self-centering.
  • Not self-locking.
  • Little axial movement during mounting.
  Concentricity: approx. 0.02 mm.
  Tolerance: Shaft h11 up to k6, Hub H7 up to H11.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	165.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes E-N

  MAEDLER

  Material: Stainless steel 1.405 (AISI 431).
  The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression.
  Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled.
  Concentricity: 0.02 mm.
  Tolerances: Shaft h7 for d = 15 mm.
  Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
  Shaft h8 for the other diameters d.
  Hub H7.
  Temperature range: -30 oC to 85 oC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	427.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes E

  MAEDLER

  Material: High-quality steel.
  The clamping bush consists of a double-walled steel sleeve filledwith a pressure medium, and a flange part. Inside the flange thereis a screw and a piston with seal to build up compression.
  Function: When the thrust screw is tightened, the sleeve expandsuniformly against shaft and hub, creating a rigid connectionthrough frictional force. When the thrust screw is loosened, thebush returns to its initial position and can be easily disassembled.
  Concentricity: 0.02 mm.
  Tolerances: Shaft h7 for d = 15 mm.
  Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
  Shaft h8 for the other diameters d.
  Hub H7.
  Temperature range: -30°C to 85°C.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	255.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink disc, form A steel (23380)

  NORELEM

  · To connect a hollow shaft to a shaft
  
  · Suitable for static, dynamic and shock loads
  
  · For very high torques
  
  · No shift of axial shaft/hub during assembly
  
  · Self-centring

  Select to compare

  Configure now
  Starting from∗ ：	28.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink disc, stainless steel (23380)

  NORELEM

  · To connect a hollow shaft to a shaft
  
  · Suitable for static, dynamic and shock loads
  
  · For very high torques
  
  · No shift of axial shaft/hub during assembly
  
  · Self-centring

  Select to compare

  Configure now
  Starting from∗ ：	99.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink disc, form B steel (23382)

  NORELEM

  · To connect a hollow shaft to a shaft
  
  · Suitable for static, dynamic and shock loads
  
  · For very high torques
  
  · No shift of axial shaft/hub during assembly
  
  · Self-centring

  Select to compare

  Configure now
  Starting from∗ ：	37.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...