Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Levelling Feet

    Selected Product

    • Leveling feet, foot / threaded stud Stainless Steel
      • SLEVA
      • Volume Discount

      GANTER

      Leveling feet, foot / threaded stud Stainless Steel

      The static load of the levelling feet GN 343.6 is limited by the laod capacity of the Stainless Steel ball joint with threaded stud (AISI 303).The static load values in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loadting or angular loading is not uncommon and the load capacity would be considerable reduced which must be taken into consideration.Levelling feet GN 343.6 cannot be disassembled.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      13.54 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Levelling feet with threaded stud, Steel
      • SLEVA
      • Volume Discount

      GANTER

      Levelling feet with threaded stud, Steel

      The static load of the levelling feet GN 343.2 is limited by the load capacity of the ball joint with threaded stud (tensile strength class 5.8 (500 N/mm2)).The static load values (only valid for Type OS / KS) in the above table refer to a net vertical load in relation to the levelling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.Levelling feet GN 343.2 cannot be disassembled.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      6.42 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Leveling Mounts / Standard Type
      • SLEVA
      • Volume Discount

      MISUMI

      Leveling Mounts / Standard Type

      Space saving type leveling mount. When mounted directly on the aluminum extrusion, the pad does not protrude from the outer dimensions.
      Více informací
      Selected Product
      Leveling Mounts
      Cena (bez DPH) od:
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Leveling Mount Unit
      • Volume Discount

      MISUMI

      Leveling Mount Unit

      Unit for mounting levelling feet for aluminium extrusions. Set of adjusters, plates, screws and nuts.
      Více informací
      Selected Product
      Leveling Mounts
      Cena (bez DPH) od:
      14.68 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Stainless Steel-Levelling Feet / GN 31
      • SLEVA
      • Volume Discount

      GANTER

      Stainless Steel-Levelling Feet / GN 31

      GN 31 Stainless Steel-Levelling feet with vulcanised rubber (Type B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to clean. Stainless Steel-Levelling feet GN 31 will be delivered mounted and are not removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      12.82 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Levelling Feet / GN 30 / Steel / Zinc Plated / Rubber Inlaid / Black, White / A1, A2
      • SLEVA
      • Volume Discount

      GANTER

      Levelling Feet / GN 30 / Steel / Zinc Plated / Rubber Inlaid / Black, White / A1, A2

      Levelling feet GN 30 will be delivered mounted and are not removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      10.50 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Stainless Steel-Levelling feet, with and without rubber underlay
      • SLEVA
      • Volume Discount

      GANTER

      Stainless Steel-Levelling feet, with and without rubber underlay

      Stainless Steel-Levelling feet GN 41 will be delivered mounted and are not removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      6.30 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Ball jointed levelling feet, Plastic, Stainless Steel
      • SLEVA
      • Volume Discount

      GANTER

      Ball jointed levelling feet, Plastic, Stainless Steel

      Ball jointed levelling feet GN 638 feature a smaller size ball diameter than the trunk of the threaded stud. As a result the studs can be screwed into position from the ball side. The ball end can easily be hammered in and also dismantled.Details regarding the static load capacity have been established by a series of tests but are indicative only. For these tests the loads have been placed vertically and centrally over the stud. At the measured load of 3,5 kN there was no remaining deformation visible on the thrust pad nor was there any breakage.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      2.56 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Ball jointed levelling feet, Plastic / Steel
      • SLEVA
      • Volume Discount

      GANTER

      Ball jointed levelling feet, Plastic / Steel

      Ball jointed levelling feet GN 638 feature a smaller size ball diameter than the trunk of the threaded stud. As a result the studs can be screwed into position from the ball side. The ball end can easily be hammered in and also dismantled.Details regarding the static load capacity have been established by a series of tests but are indicative only. For these tests the loads have been placed vertically and centrally over the stud. At the measured load of 3,5 kN there was no remaining deformation visible on the thrust pad nor was there any breakage.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      2.22 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Stainless Steel-Levelling Elements / GN 355
      • Volume Discount

      GANTER

      Stainless Steel-Levelling Elements / GN 355

      Levelling elements GN 355 are used for levelling and adjustment in machines and equipment.They consist of a levelling screw, a cylinder screw with disk and a spherical washer. After making the adjustment using the assembly tools GN 355.1 available as accessory, the screw is tightened firmly causing the levelling screw and the spherical washer DIN 6319 underneath to spread and is so secured against twisting in the taphole.The values for w and x given in the table and for the static load capacity are to be seen as reference values which may differ depending on the prevailing situation. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      19.58 €
      Běžné datum odeslání:
      4 pracovních dnů
      Konfigurovat
    • Leveling Foot
      • Stock

      NIC AUTOTEC

      Leveling Foot

      [Features] 95 mm long, 60 mm wide.
      Více informací
      Selected Product
      Leveling Mounts
      Cena (bez DPH) od:
      4.20 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Levelling feet, threaded bushing steel
      • SLEVA
      • Volume Discount

      GANTER

      Levelling feet, threaded bushing steel

      Levelling feet GN 343.1 cannot be disassembled.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      5.90 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Levelling feet, foot plastic / threaded bushing steel
      • SLEVA
      • Volume Discount

      GANTER

      Levelling feet, foot plastic / threaded bushing steel

      Levelling feet GN 343.3 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Exceeding the static values specified in the above table could lead to failure of the plastic component.The above values have been arrived at by a series of load tests whereby a defined number of levelling feet were subjected to a vertical load over a defined period.Levelling feet GN 343.3 are supplied assembled, but are removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      2.92 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Anchors / Heavy Type
      • Volume Discount
      • Order quantities extended (D-JIT)

      MISUMI

      Anchors / Heavy Type

      Více informací
      Selected Product
      Anchor
      Cena (bez DPH) od:
      20.01 €
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      K dispozici odeslání ve stejný den
      Konfigurovat
    • Levelling elements, Steel
      • Volume Discount

      GANTER

      Levelling elements, Steel

      Levelling elements GN 355 are used for levelling and adjustment in machines and equipment.They consist of a levelling screw, a cylinder screw with disk and a spherical washer. After making the adjustment using the assembly tools GN 355.1 available as accessory, the screw is tightened firmly causing the levelling screw and the spherical washer DIN 6319 underneath to spread and is so secured against twisting in the taphole.The values for w and x given in the table and for the static load capacity are to be seen as reference values which may differ depending on the prevailing situation. In general, they do not constitute a warranty of condition. The user must determine whether the product is suitable for the intended purpose.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      16.26 €
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Levelling feet with vibration absorbing
      • SLEVA
      • Volume Discount

      GANTER

      Levelling feet with vibration absorbing

      The specified load in the above table is a recommendation up to which the damping insert can be permanently subjected.This static load equals a thrust on the area of 0,4 N/mm2, at which the damping material reaches its optimum dynamic damping ability. This also takes into account an additional load up to 0,6 N/mm2 in the event of a dynamic load.Levelling feet GN 342.2 cannot be disassembled.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      15.00 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Leveling Mounts / Space Saving Type
      • SLEVA
      • Volume Discount

      MISUMI

      Leveling Mounts / Space Saving Type

      Standard type leveling mount. Sizes from M5 to M20 are available.
      Více informací
      Selected Product
      Leveling Mounts
      Cena (bez DPH) od:
      10.71 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Stainless Steel-Levelling feet, A4 (GN 44)
      • SLEVA
      • Volume Discount

      GANTER

      Stainless Steel-Levelling feet, A4 (GN 44)

      GN 44 Stainless Steel-Levelling feet are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these levelling feat to be used in every situation.The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The type B0 can also be fastened to the mounting surface through two holes.The levelling feet are supplied fully assembled and are not removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      6.40 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Levelling feet, steel sheet, zinc plated with and without rubber underlay
      • SLEVA
      • Volume Discount

      GANTER

      Levelling feet, steel sheet, zinc plated with and without rubber underlay

      Levelling feet GN 40 are easy and very reasonably priced foot design variants.Theywill be delivered mounted and are not removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      4.68 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Levelling feet, threaded bushing Stainless Steel
      • SLEVA
      • Volume Discount

      GANTER

      Levelling feet, threaded bushing Stainless Steel

      Levelling feet GN 343.7 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Exceeding the static values specified in the above table could lead to failure of the plastic component.The above values have been arrived at by a series of load tests whereby a defined number of levelling feet were subjected to a vertical load over a defined period.Levelling feet GN 343.7 are supplied assembled, but are removable.The static load of the levelling feet GN 343.7 / GN 343.8 is limited by the load capacity of the Stainless Steel ball joint (AISI 303). The static load values in the above table refer to a net vertical load in relation to the levelling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.Levelling feet GN 343.7 / GN 343.8 cannot be disassembled.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      3.98 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Stainless Steel-Levelling Feet / GN 23
      • SLEVA
      • Volume Discount

      GANTER

      Stainless Steel-Levelling Feet / GN 23

      Stainless Steel-Levelling feet GN 23 will be delivered mounted and are not removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      51.64 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Stainless Steel-Levelling feet with mounting lug
      • SLEVA
      • Volume Discount

      GANTER

      Stainless Steel-Levelling feet with mounting lug

      Stainless Steel-Levelling feet GN 33 will be delivered mounted and are not removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      14.38 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Levelling feet with mounting lug
      • SLEVA
      • Volume Discount

      GANTER

      Levelling feet with mounting lug

      Levelling feet GN 32 will be delivered mounted and are not removable.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      10.76 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Levelling feet, foot / threaded bushing Stainless Steel
      • SLEVA
      • Volume Discount

      GANTER

      Levelling feet, foot / threaded bushing Stainless Steel

      Levelling feet GN 343.5 cannot be disassembled.
      Více informací
      Selected Product
      -
      Cena (bez DPH) od:
      11.14 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Ball Type Adjuster

        YUKI LABORATORY

        Ball Type Adjuster

        [Features]· The swivel mechanism also supports distorted floor surfaces.[Note]· When the solvent resistance of the floor coating is low, the rubber of the adjuster may stick to the floor and lose its adhesive.· The foot is a fit-in type, so it may become detached. Press-fit again if it comes off.
        Více informací
        Selected Product
        Leveling Mounts
        Cena (bez DPH) od:
        5.82 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Levelling Feet / Steel / GN 339 / Diameter 29, 36
        • SLEVA
        • Volume Discount

        GANTER

        Levelling Feet / Steel / GN 339 / Diameter 29, 36

        Levelling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw.For this reason they offer the advantage of reduced height.The gliding and/or the non-gliding protective cap is safely fixed in the foot.
        Více informací
        Selected Product
        -
        Cena (bez DPH) od:
        7.80 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Levelling sets with spherical washer, with locknut
        • Volume Discount

        GANTER

        Levelling sets with spherical washer, with locknut

        Levelling sets GN 350.5 are used for levelling, adjusting and linking operations. The spherical washer allows precise installation of two non parallel planes at a required gradient up to ≈ 4°.They comprise a threaded upper sleeve and a female threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.
        Více informací
        Selected Product
        -
        Cena (bez DPH) od:
        69.92 €
        Běžné datum odeslání:
        7 pracovních dnů
        Konfigurovat
      • Stainless Steel-Levelling Feet / GN 21
        • Volume Discount

        GANTER

        Stainless Steel-Levelling Feet / GN 21

        Stainless Steel-Levelling feet GN 21 will be delivered mounted and are not removable.
        Více informací
        Selected Product
        -
        Cena (bez DPH) od:
        47.66 €
        Běžné datum odeslání:
        7 pracovních dnů
        Konfigurovat
      • Stainless Steel-Levelling Feet / GN 339
        • SLEVA
        • Volume Discount

        GANTER

        Stainless Steel-Levelling Feet / GN 339

        Levelling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw.For this reason they offer the advantage of reduced height.The gliding and/or the non-gliding protective cap is safely fixed in the foot.
        Více informací
        Selected Product
        -
        Cena (bez DPH) od:
        13.40 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Anchor Stands / 4-point Anchor / 2-point Anchor
        • SLEVA
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Anchor Stands / 4-point Anchor / 2-point Anchor

        [Specifications]・Type: Anchor Stands for Aluminum Extrusions・Material: EN 1.0320 Equiv. (hot coiled)・Extrusion Series: HFS
        Více informací
        Selected Product
        Anchor
        Cena (bez DPH) od:
        14.00 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Stainless Steel Adjuster, Small

          YUKI LABORATORY

          Stainless Steel Adjuster, Small

          [Features]· The main body is made of stainless steel with excellent corrosion resistance.· The swivel mechanism can accommodate up to an approximately 10° slant in the floor surface.· The dual structure of the main body and the base enables the height to be adjusted by turning manually after it has been installed.· The base is made of anti-slip elastomer.[Applications]· Suitable for clean benches, etc.
          Více informací
          Selected Product
          Leveling Mounts
          Cena (bez DPH) od:
          12.76 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Economy Type Adjuster
          • SLEVA
          • Volume Discount
          • Stock

          YUKI LABORATORY

          Economy Type Adjuster

          [Features]· An adjuster with excellent cost performance.
          Více informací
          Selected Product
          Leveling Mounts
          Cena (bez DPH) od:
          9.47 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          K dispozici odeslání ve stejný den
          Konfigurovat
        • Bull's Eye Levels / GN 2279 / ALN, ALS / K Colourless-transparent
          • Volume Discount

          GANTER

          Bull's Eye Levels / GN 2279 / ALN, ALS / K Colourless-transparent

          Bull´s eye levels GN 2279 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.Type A is used if the spirit level is to be used as a tool, e.g. at different measuring points.The spirit levels are aligned in relation to the reference or contact surface, such that the bubble is located inside the marking ring once the horizontal position of the contact surface is reached.
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          10.76 €
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Levelling feet with mounting holes, Hygienic Design
          • Volume Discount

          GANTER

          Levelling feet with mounting holes, Hygienic Design

          GN 20 hygienic leveling feet with mounting holes are certified according to EHEDG guidelines and are therefore ideal for use in hygienic applications.The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be screwed on using the mounting holes and compressed accordingly. Hygienic fastenings and the correct position of the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball seal, the moving components are sealed against the environment.The high quality finish prevents adherence of dirt and facilitates cleaning.The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          166.02 €
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Stainless Steel-Spherical levelling washers
          • SLEVA
          • Volume Discount

          GANTER

          Stainless Steel-Spherical levelling washers

          Stainless Steel-Spherical levelling washers GN 350.3 have been designed to match the levelling sets GN 350, GN 350.1, GN 350.2 and GN 350.5.The two spherical washers are used together „undetachably“.The load bearing capacity of these spherical washers is relatively high. This is not only due to the material quality but also to the matched sphere of the concave „pan“.Furthermore it is recommended using high-strength washers for bridging d2.
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          25.68 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Euro-Gripper-Tooling - Pedestal 80er, SW80-RD30-L90
          • New Product

          TUENKERS

          Euro-Gripper-Tooling - Pedestal 80er, SW80-RD30-L90

          Pedestal 80er, SW80-RD30-L90
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          66.85 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • Anchor Stands / Sheet Metal
          • Volume Discount
          • Order quantities extended (D-JIT)
          • Stock

          MISUMI

          Anchor Stands / Sheet Metal

          Více informací
          Selected Product
          Anchor
          Cena (bez DPH) od:
          8.95 €
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Levelling feet with vibration absorbing, Steel
          • SLEVA
          • Volume Discount

          GANTER

          Levelling feet with vibration absorbing, Steel

          The specified load in the above table of the levelling feet GN 342.1 is a recommendation up to which the damping element can be permanently subjected.This static load equals a thrust on the area of 0,4 N/mm2, at which the damping material reaches its optimum dynamic damping ability. This also takes into account an additional load up to 0,6 N/mm2 in the event of a dynamic load.Levelling feet GN 342.1 can not be disassembled.
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          13.76 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Levelling feet without mounting holes, Hygienic Design
          • Volume Discount

          GANTER

          Levelling feet without mounting holes, Hygienic Design

          GN 20 levelling feet without mounting holes are intended for use in hygiene areas. The bottom seal protects the area beneath the foot plate from dirt. For this, the foot must be screwed on using the mounting holes and compressed accordingly. Hygienic fastenings and the correct position of the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball seal, the moving components are sealed against the environment.The high quality finish prevents adherence of dirt and facilitates cleaning.The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          132.30 €
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Spherical levelling washers, Steel
          • Volume Discount

          GANTER

          Spherical levelling washers, Steel

          Spherical levelling washers GN 350.3 have been designed to match the levelling sets GN 350, GN 350.1, GN 350.2 and GN 350.5.The two spherical washers are used together „undetachably“.The load bearing capacity of these spherical washers is relatively high. This is not only due to the material quality but also to the matched sphere of the concave „pan“.Furthermore it is recommended using high-strength washers for bridging d2.
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          17.62 €
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Stainless Steel-Levelling feet with mounting lug, with and without rubber underl
          • SLEVA
          • Volume Discount

          GANTER

          Stainless Steel-Levelling feet with mounting lug, with and without rubber underl

          Stainless Steel-Levelling feet GN 43 will be delivered mounted and are not removable.
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          7.70 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Stainless Steel-Levelling feet with fixing lug, rectangular shape (GN 43)
          • Volume Discount

          GANTER

          Stainless Steel-Levelling feet with fixing lug, rectangular shape (GN 43)

          GN 43 Stainless Steel-Levelling feet are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these levelling feat to be used in every situation.The levelling feet can be screwed to the mounting surface use the fixing lug, which prevents lateral shifting. Moreover, the types with the rubber underlay protect sensitive surfaces.The levelling feet are supplied fully assembled and are not removable.
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          14.58 €
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Euro-Gripper-Tooling - Pedestal 50er, SW50-RD30-L90
          • New Product

          TUENKERS

          Euro-Gripper-Tooling - Pedestal 50er, SW50-RD30-L90

          Pedestal 50er, SW50-RD30-L90
          Více informací
          Selected Product
          -
          Cena (bez DPH) od:
          65.49 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • Set of AG Series Anchor Connection Brackets AGBK30A

            NIC AUTOTEC

            Set of AG Series Anchor Connection Brackets AGBK30A

            -AG series safety fence anchor bracket set. Cylindrical bracket (30 mm).
            Více informací
            Selected Product
            Anchor
            Cena (bez DPH) od:
            32.07 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Small Adjuster

              YUKI LABORATORY

              Small Adjuster

              [Features]· The thin design does not damage the design of the housing.· With a cross socket that's convenient for installation.[Applications]· An adjuster with a compact design.
              Více informací
              Selected Product
              Leveling Mounts
              Cena (bez DPH) od:
              3.49 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat