Drill Bits
Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
3 položek
* Informace o dnech dodání, přepravních nákladech a cenách
ISCAR
Cam Drill (Replaceable-Head Drill Body) DCM-3D Processing Diameter 7.5 mm–25.9 mm
Machining Diameter: 7.5 mm to 25.9 mmVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 13.5 to 13.9 40 General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] - 106.5 End Mill Shank N/A - Available KonfigurovatBěžná cena (bez DPH):311.33 €Běžné datum odeslání:8 pracovních dnů
ISCAR
SUMOCHAM (Head Replacement Type Drill Body) DCN-5D, Machining Diameter 6.0 mm–32.9 mm
The cutting force increases the clamping force of the head, which enables stable machining, and is a part for free-cutting steelOCHAM that achieves good internal lubrication through the coolant hole at the tip of the holder.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 13.5 to 13.9 68 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] - 133.1 End Mill Shank N/A - N/A KonfigurovatBěžná cena (bez DPH):399.75 €Běžné datum odeslání:6 pracovních dnů
ISCAR
SUMOCHAM (Head Replacement Type Drill Body) DCN-3D, Machining Diameter 6.0 mm–32.9 mm
Machining Diameter: 6.0 mm to 32.9 mmVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 13.5 to 13.9 41 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] - 106.1 End Mill Shank N/A - N/A KonfigurovatBěžná cena (bez DPH):349.46 €Běžné datum odeslání:8 pracovních dnů
