Equipment Castors (Caster Type: Screw-In Type Stránka 9)

• 

  • Volume Discount

  TAKIGEN(HAMMER CASTER)

  Autoline Caster, 420LEA/420REA/420LMA/420RMA, 100 to 125 mm

  [Features]· A special caster for auto-line that can be attached to shopping carts, etc.· Used for shopping carts at large electronic appliance stores, home centers, supermarkets, etc.

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	126 ～ 154	35.01 to 80.00	Not Provided	Urethane	Abrasion Resistance / Gasoline Resistant (including Light Oil) / Oil Resistance	Steel / Others	-

  Cena (bez DPH) od:

  34.73 €

  Běžné datum odeslání:

  14 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  UCHIMURA

  Standard Class 300s Bolt Type Synthetic Rubber Wheel with Stopper (Packing Castors)

  [Features]· Can be mounted by turning and tightening a hex washer with a dedicated wrench.· Ideal for equipment, etc., that has a small mounting area.· No. 309 to 311, 309s to 311s can be mounted by being inserted into a pipe-shaped leg part and tightened.

  Více informací

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	66 ～ 124	35.01 to 80.00 / 80.01 to 140.00	With Rotation Stopper	Synthetic Rubber	Abrasion Resistance / Gasoline Resistant (including Light Oil) / Oil Resistance / Chemical Resistance	Steel	-

  Cena (bez DPH) od:

  10.39 €

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  UCHIMURA

  Medium Class 300H Bolt Type Synthetic Rubber Wheel for Heavy Weights (Packing Castors)

  A compact screw-in type caster for heavy weights that is ideal for heavy equipment with a minimal mounting surface area.

  Více informací

  CAD:

  2D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	128	140.01 to 220.00	Not Provided	Synthetic Rubber	Abrasion Resistance / Gasoline Resistant (including Light Oil) / Oil Resistance / Chemical Resistance	Steel	-

  Cena (bez DPH) od:

  106.13 €

  Běžné datum odeslání:

  13 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  UCHIMURA

  Super Heavy Class 300X-N Bolt Type Nylon Wheel for Super Heavy Weights (Packing Castors)

  Employs a high tensile material. Strength is doubled by heat treatment. Can turn with 1/3 the force of conventional products.

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	85	220.01 to 320.00	Not Provided	Nylon	Abrasion Resistance / Gasoline Resistant (including Light Oil) / Oil Resistance / Chemical Resistance	Aluminum	-

  Cena (bez DPH) od:

  160.42 €

  Běžné datum odeslání:

  22 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  SONRIN

  Screw-in Type, Swivel Type Castors [WL13A]

  A screw-in type, swivel type caster with an allowable load of 40 to 200daN. A steel and rubber wheel type product. SONRIN Corporation is a Chinese caster manufacturer founded in 1998. It is well-known as high quality Asian manufacturer. They offer a variety of wheels for different applications.

  Více informací

  CAD:

  2D

  /3D

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	72 ～ 243	35.01 to 80.00 / 80.01 to 140.00 / 140.01 to 220.00	Not Provided	Synthetic Rubber / Engineering Plastics / Others / Rubber	Not Provided	Steel	-

  Cena (bez DPH) od:

  5.28 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  TRUSCO NAKAYAMA

  Screw-in Type Nylon Castors, Stainless Steel Hardware, Swivel

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	126	35.01 to 80.00	Not Provided / With Rotation Stopper	Nylon	Not Provided	Stainless Steel	-

  Cena (bez DPH) od:

  26.61 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  TRUSCO NAKAYAMA

  Screw-in Type Elastomer Castors, Swivel

  [Features]· Turns quietly and does not leave slip marks on the floor.· Does not stain floors.

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	97 ～ 126	35.01 to 80.00	Not Provided / With Rotation Stopper	Elastomer	Not Provided	Steel	-

  Cena (bez DPH) od:

  12.00 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  TRUSCO NAKAYAMA

  Quiet Castors, Screw-in Type Elastomer Wheel, Swivel

  [Features]· The radial bearings used for the wheel feature reduced starting resistance and quieter turning.· The material is less likely to leave marks on the floor than rubber wheels.· Quieter than nylon wheels.· Since the wheel part features a cover, dust cannot easily enter the structure. (100 mm diameter only)

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	96 ～ 125	35.01 to 80.00	Not Provided / With Rotation Stopper	Elastomer	Not Provided	Steel	-

  Cena (bez DPH) od:

  12.93 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TRUSCO NAKAYAMA

  Screw-in Type Conductive Rubber Castors, Stainless Steel Hardware, Swivel

  [Features]· Since it is made of stainless steel, the product has superior corrosion resistance and water resistance.· By using a conductive rubber wheel, static electricity is easily discharged, preventing the absorption of dust.[Uses]· Ideal for transport of electronic and medical equipment for which static electricity and dust can be damaging.

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	126	35.01 to 80.00	Not Provided / With Rotation Stopper	Rubber	Antistatic / Not Provided	Stainless Steel	-

  Cena (bez DPH) od:

  36.57 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TRUSCO NAKAYAMA

  Screw-in Type Castors, Nylon Wheel, Swivel

  [Features] Excellent chemical resistance, corrosion resistance and abrasion resistance, light weight, easy to remove dirt to keep its outer appearance clean.

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	95	35.01 to 80.00	Not Provided / With Rotation Stopper	Nylon	Not Provided	Steel	-

  Cena (bez DPH) od:

  10.16 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  TRUSCO NAKAYAMA

  Screw-in Type Castors, Swivel

  [Features]· Since the surface treatment is chrome-plated, the finish is glossy.

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	95	35.01 to 80.00	Not Provided / With Rotation Stopper	Rubber	Not Provided	Steel	-

  Cena (bez DPH) od:

  11.25 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  HAION

  H322 Series - With Threaded Stem

  Design caster. Can be used for high-class medical equipment. Precision ball bearings in both the swivel head and wheel for smooth movement. Double-brake design with both wheel lock and directional lock, ensuring easy lock and release with the curved brake pedal. Static load: double.

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	143	80.01 to 140.00	Not Provided	Polyurethane	Not Provided	-	-

  Cena (bez DPH) od:

  64.11 €

  Běžné datum odeslání:

  25 pracovních dnů

  Konfigurovat
• 

  SUNCO

  Caspad Bolt Type【1 až 40 kusů】

  [Compact & Free]By using Caspads you can eliminate the labor of mounting adjusters. The caster main body can be freely turned and fixed in any direction when installing. [Safety]Caspads have excellent seismic resistance, while also being safe and easy to install. Seismic resistance and safety can be raised even further with the use of optional parts. [Ecology]Caspads employ a simple disassembly structure, making them easy to dismantle. A caster that is not only convenient, but also made with effective use of resources.

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	67	485.01 to 750.00	Not Provided	Nylon	Not Provided	Steel / Stainless Steel	-

  Cena (bez DPH) od:

  19.56 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  YUEI CASTER

  SKY Series SKY-T Model

  Screw-in-type caster with shock absorber, ideal for transporting precision equipment and parts. [Features]· Built-in Yuei damper absorbs shock.· Prevents vibration and noise generated during travel.· Does not easily build up electrical charge, preventing dust pickup. (Wheel material: anti-static urethane)

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	171	Up to 35.00	Not Provided	Urethane	Abrasion Resistance / Gasoline Resistant (including Light Oil) / Oil Resistance / Antistatic	Stainless Steel	-

  Cena (bez DPH) od:

  150.25 €

  Běžné datum odeslání:

  18 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, B-ALSI Series

  Pressed Steel Fixed Castor, Medium Duty Design, with Top Plate Fitting, Blickle Templine® Comfort Wheel, with Silicone Rubber Tread, with Aluminium Wheel Centre, Heat-ResistantBracket: B seriespressed steel, zinc-plated, blue-passivated, Cr6-freeWheel: ALSI seriesTread: highly heat-resistant silicone rubber, hardness 75 Shore A, colour black, non-markingwheel centre: die-cast aluminiumOther features:chemical resistance to many aggressive substancesoperating temperature: -25 °C to +250 °Coven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	150	80.01 to 140.00	-	Aluminum	Antistatic	-	-

  Cena (bez DPH) od:

  67.40 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, B-ALTH Series

  Pressed Steel Fixed Castor, Medium Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel CentreBracket: B seriespressed steel, zinc-plated, blue-passivated, Cr6-freeWheel: ALTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: die-cast aluminium, colour silver greyOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	102 ～ 235	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00	-	Aluminum	Antistatic	-	-

  Cena (bez DPH) od:

  61.13 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, B-G Series

  Pressed Steel Fixed Castor, Medium Duty Design, with Top Plate Fitting, Cast Iron WheelBracket: B seriespressed steel, zinc-plated, blue-passivated, Cr6-freeWheel: G seriesrugged grey cast iron, hardness 180–220 HB, grease nipple, lacquered, colour silverOther features:chemical resistance to many aggressive substancesconsider the surface pressure on sensitive floors due to high point loadsprovide adequate lubrication on a regular basis for plain bore versionto be lubricated according to the application temperature

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	195 ～ 235	140.01 to 220.00 / 320.01 to 485.00	-	Others	-	-	-

  Cena (bez DPH) od:

  28.89 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, B-GST Series

  Pressed Steel Fixed Castor, Medium Duty Design, with Top Plate Fitting, with Drum Brake, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: B seriespressed steel, zinc-plated, blue-passivated, Cr6-freeWheel: GST seriestread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-stainingwheel centre: rugged grey cast iron, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °Cactuation path: approx. 10–12 mmoperating angle: approx. 13°–15°actuation force: < 250 Nbraking force: > 500 N

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	140 ～ 235	485.01 to 750.00	-	Others	-	-	-

  Cena (bez DPH) od:

  452.38 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, B-GTH Series

  Pressed Steel Fixed Castor, Medium Duty Design, with Top Plate Fitting, with Drum Brake, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: B seriespressed steel, zinc-plated, blue-passivated, Cr6-freeWheel: GTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: rugged grey cast iron, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °Cactuation path: approx. 10–12 mmoperating angle: approx. 13°–15°actuation force: < 250 Nbraking force: > 500 N

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	140 ～ 165	485.01 to 750.00	-	Others	-	-	-

  Cena (bez DPH) od:

  411.10 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-ALBS Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel Centre, BH-ALBS SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: ALBS seriestread: high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, colour blue, non-marking, non-stainingwheel centre: die-cast aluminium, colour silver greyOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	120 ～ 295	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Aluminum	Antistatic / Conductivity	-	-

  Cena (bez DPH) od:

  91.66 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-ALEV Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Aluminium Wheel Centre, BH-ALEV SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: ALEV seriestyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour blackwheel centre: die-cast aluminiumOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	140 ～ 295	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Aluminum	Antistatic / Conductivity	-	-

  Cena (bez DPH) od:

  60.75 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-ALST Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Aluminium Wheel Centre, BH-ALST SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: ALST seriestread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-stainingwheel centre: die-cast aluminium, colour silver greyOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	120 ～ 295	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Aluminum	Antistatic	-	-

  Cena (bez DPH) od:

  82.28 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-DSPKGSPO Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting Twin Flanged Wheel of Compressed Cast NylonBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: DSPKGSPO serieshigh-quality cast nylon, impact resistant, hardness 80 Shore D, colour natural beigeOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +80 °C, reduced load capacity over +35 °Cconsider the surface pressure on sensitive floors due to high point loads

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	118 ～ 245	35.01 to 80.00 / 140.01 to 220.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Cena (bez DPH) od:

  99.45 €

  Běžné datum odeslání:

  23 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BHF-ALST Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Steel Spring, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Aluminium Wheel CentreBracket: BHF seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top platerobust spring structure with steel springmaintenance-free spring mechanismWheel: ALST seriestread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-stainingwheel centre: die-cast aluminium, colour silver greyOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	175	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Aluminum	Antistatic	-	-

  Cena (bez DPH) od:

  292.59 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BHF-ALTH Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Steel Spring, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel CentreBracket: BHF seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top platerobust spring structure with steel springmaintenance-free spring mechanismWheel: ALTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: die-cast aluminium, colour silver greyOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	140 ～ 265	320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Aluminum	Antistatic	-	-

  Cena (bez DPH) od:

  298.17 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-G Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Cast Iron Wheel, BH-G SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: G seriesrugged grey cast iron, hardness 180–220 HB, grease nipple, lacquered, colour silverOther features:chemical resistance to many aggressive substancesconsider the surface pressure on sensitive floors due to high point loadsto be lubricated according to the application temperature

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	120 ～ 295	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Others	-	-	-

  Cena (bez DPH) od:

  42.55 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-GB Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: GB seriestread: high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A, colour brown, non-marking, non-stainingwheel centre: rugged grey cast iron, with grease nipple from wheel Ø 150 mm, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	97 ～ 295	320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Others	-	-	-

  Cena (bez DPH) od:

  123.18 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-GSPO Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel Made of Compressed Cast Nylon, BH-GSPO SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: GSPO serieshigh-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, colour natural beigeOther features:high chemical resistance to many aggressive substancesreduced moisture absorptionoperating temperature: -20 °C to +80 °C, reduced load capacity over +35 °Cconsider the surface pressure on sensitive floors due to high point loads

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	120 ～ 245	485.01 to 750.00 / 750.01 or More	-	Engineering Plastics	-	-	-

  Cena (bez DPH) od:

  93.97 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-GST Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: GST seriestread: high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A, colour green, non-marking, non-stainingwheel centre: rugged grey cast iron, with grease nipple from wheel Ø 160 mm, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	140 ～ 295	320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Others	-	-	-

  Cena (bez DPH) od:

  162.87 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-GTH Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel CentreBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: GTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: rugged grey cast iron, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	165 ～ 295	320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Others	Conductivity	-	-

  Cena (bez DPH) od:

  98.91 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-PATH Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel Centre, BH-PATH SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: PATH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	140 ～ 245	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	Conductivity	-	-

  Cena (bez DPH) od:

  72.15 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-PO Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Nylon Wheel, BH-PO SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: PO serieshigh-quality nylon 6, impact resistant, hardness 70 Shore D, colour natural whiteOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	120 ～ 295	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Engineering Plastics	Conductivity	-	-

  Cena (bez DPH) od:

  34.00 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-POEV Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Nylon Wheel Centre, BH-POEV SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: POEV seriestyre: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, colour blackwheel centre: high-quality nylon 6, impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	120 ～ 295	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Cena (bez DPH) od:

  46.16 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-POTH Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel Centre, BH-POTH SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: POTH seriestread: high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A, colour dark grey, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour natural whiteOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	118 ～ 295	140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00 / 750.01 or More	-	Engineering Plastics	-	-	-

  Cena (bez DPH) od:

  44.82 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-POTHS Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with Soft Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel Centre, BH-POTHS SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: POTHS seriestread: high-quality thermoplastic polyurethane (TPU), hardness 80 Shore A, colour blue, non-marking, non-stainingwheel centre: high-quality nylon 6, impact resistant, colour natural whiteOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	202 ～ 245	220.01 to 320.00 / 320.01 to 485.00 / 485.01 to 750.00	-	Engineering Plastics	-	-	-

  Cena (bez DPH) od:

  83.70 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-RD Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with 'Blickle Comfort' Two-Component Solid Rubber Tyres, with Pressed Steel Rim, BH-RD SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: RD seriestyre: two-component solid rubber "Blickle Comfort", hardness 56 Shore A, colour greyrim: pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-freeOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -25 °C to +80 °C, reduced load capacity over +60 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	140 ～ 295	220.01 to 320.00 / 320.01 to 485.00	-	Steel	-	-	-

  Cena (bez DPH) od:

  78.00 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-SETH Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Welded Steel Wheel CentreBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: SETH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: thick-walled pressed steel, triple welded, with tubular steel hub, lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	140 ～ 295	485.01 to 750.00 / 750.01 or More	-	Steel	-	-	-

  Cena (bez DPH) od:

  178.78 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-SVS Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Extra Heavy Duty Solid Steel WheelBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: SVS seriesheat-treatable steel, hardness 190–230 HB, slightly crowned treadOther features:chemical resistance to many aggressive substancesoperating temperature: -20 °C to +120 °Cconsider the surface pressure on sensitive floors due to high point loads

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	295	485.01 to 750.00 / 750.01 or More	-	Steel	Conductivity	-	-

  Cena (bez DPH) od:

  87.15 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-V Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with Standard Solid Rubber Tyre, with Pressed Steel Rim, Reinforced DesignBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: V seriestyre: standard solid rubber, hardness 80 Shore A, colour blackrim: pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-freeOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -25 °C to +80 °C, reduced load capacity over +60 °CCentrally-pressed version

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	120 ～ 295	220.01 to 320.00	-	Steel	-	-	-

  Cena (bez DPH) od:

  124.31 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-VPP Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with Standard Solid Rubber Tyre, with Synthetic RimBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: VPP seriestyre: standard solid rubber, hardness 80 Shore A, colour blackrim: high-quality polypropylene, impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	125 ～ 295	220.01 to 320.00	-	Engineering Plastics	Heat Resistance	-	-

  Cena (bez DPH) od:

  106.80 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-VSTH Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel Centre, BH-VSTH SeriesBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: VSTH seriestread: high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A, colour light brown, non-marking, non-stainingwheel centre: steelOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	150	220.01 to 320.00	-	Steel	Heat Resistance	-	-

  Cena (bez DPH) od:

  97.20 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-VW Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with 'Blickle Soft' Soft Rubber Tyre, with Pressed Steel RimBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: VW seriestyre: soft rubber "Blickle Soft", hardness 50 Shore A, colour black (wheel Ø 260 mm with additional hard rubber core)rim: pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-freeOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -25 °C to +80 °C, reduced load capacity over +60 °Cpuncture-proof alternatives for pneumatic tyres

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	150 ～ 190	140.01 to 220.00	-	Steel	Heat Resistance	-	-

  Cena (bez DPH) od:

  164.89 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BH-VWPP Series

  Pressed Steel Fixed Castor, Heavy Duty Design, with Top Plate Fitting, Wheel, with 'Blickle Soft' Soft Rubber Tyre, with Synthetic RimBracket: BH seriespressed steel, zinc-plated, blue-passivated, Cr6-freeheavy fork and top plateWheel: VWPP seriestyre: soft rubber "Blickle Soft", hardness 50 Shore A, colour black (wheel Ø 260 mm with additional hard rubber core)rim: high-quality polypropylene, impact resistant, colour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Cwheel Ø 260 mm with additional hard rubber corepuncture-proof alternatives for pneumatic tyres

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	190 ～ 235	140.01 to 220.00	-	Engineering Plastics	Heat Resistance	-	-

  Cena (bez DPH) od:

  140.81 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BI-G Series

  Pressed Steel Fixed Castor with Top Plate Fitting, Heat-Resistant, Cast Iron WheelBracket: BI seriespressed steel, zinc-plated, blue-passivated, Cr6-freeWheel: G seriesrugged grey cast iron, hardness 180–220 HB, grease nipple, lacquered, colour silverOther features:chemical resistance to many aggressive substancesconsider the surface pressure on sensitive floors due to high point loadsto be lubricated according to the application temperatureLoad capacity may be reduced in temperatures over +70 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	102 ～ 235	220.01 to 320.00 / 320.01 to 485.00	-	Others	Heat Resistance	-	-

  Cena (bez DPH) od:

  29.83 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  BLICKLE

  Pressed Steel Fixed Castor, BIK-G Series

  Pressed Steel Fixed Castor, with Top Plate Fitting, Heat-Resistant, Cast Iron WheelBracket: BIK seriesstrong pressed steel, zinc-plated, blue-passivated, Cr6-freeWheel: G seriesrugged grey cast iron, hardness 180–220 HB, grease nipple, lacquered, colour silverOther features:chemical resistance to many aggressive substancesconsider the surface pressure on sensitive floors due to high point loadsto be lubricated according to the application temperatureLoad capacity may be reduced in temperatures over +70 °C

  Více informací

  Caster Type	Type	Mounting Height H(mm)	Load Range(daN)	Stopper	Wheel Material	Wheel Characteristics	Fitting Material	Mounting Hole Type
  Screw-In Type	-	130 ～ 155	320.01 to 485.00	-	Others	-	-	-

  Cena (bez DPH) od:

  45.52 €

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat